DWNSHFT

Mazda RX-7 FB

FB (1st gen) · 1978–1985

Engine
12A
Power
128 hp
Bolt pattern (PCD)
4x110
Mazda RX-7 FB

Photo: Mr.choppers · CC BY-SA 3.0 · Wikimedia Commons

Key facts

The Mazda RX-7 FB was built from 1978–1985. Engines: 12A. Factory output is 128 hp (Japanese-market figures). Wheels bolt on with a 4x110 pattern, — mm hub bore and M12x1.5 lug thread.

Build guide

Mazda RX-7 (FB / SA22C)

12A rotary

The first RX-7, light and simple. Builds range from port work and carburettors to 13B swaps. Rust and rotary health come first.

  1. Stage 0 · BaselineStock (~130 PS)Rust, compression test, carb.~$2,000–5,000 CAD
  2. Stage 1 · Street~+10 hpSuspension, exhaust, carb.~$2,000–4,500 CAD
  3. Stage 2 · Spirited / Track~150–180 whpPort, EFI.~$4,000–8,000 CAD
  4. Stage 3 · Full build250+ whp13B swap (NA or turbo).~$10,000–25,000 CAD
Check before modifying (2)
  • Rust (everywhere; sills, floors, rear arches).
  • Apex seal wear; low compression.
Read the full Mazda RX-7 (FB / SA22C) build guide →

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Mazda 12A rotary

Naturally aspirated

A street port and a bigger carburetor, or a 13B swap.

  1. Stage 1 · Bolt-ons+10–15 hp
    • Intake
    • Exhaust
  2. Stage 2 · Supporting mods+30–50 hp
    • Porting
    • Fuel system
  3. Stage 3 · Big power+80–120 hp
    • Turbo kit
    • Standalone ECU
    • Apex seals

Known weak points

  • Apex seal wear; do a rotary compression test before buying.
  • Ignition and carburetor setup drift with age.
More about the Mazda 12A rotary →

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
RX-7SA22C12AFR128 hp4x1101978–1985

Stock spec sheet

FB RX-7SA22C

Japan (JDM)1978–1985

Engine & drivetrain

Engine
12A
Displacement
1,146 cc (1.1 L)
Aspiration
Naturally aspirated
Compression
9.4:1
Transmission
5MT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
128 hp (96 kW) @ 7,000 rpm
Torque
162 N·m (119 lb-ft) @ 4,000 rpm

Factory wheels & tires

Bolt pattern (PCD)
4x110
Lug thread
M12x1.5

Dimensions

Length
4,285 mm (168.7 in)
Width
1,675 mm (65.9 in)
Height
1,260 mm (49.6 in)
Wheelbase
2,420 mm (95.3 in)

12A two-rotor, gross rating.

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Mazda RX-7 FB have?

The Mazda RX-7 FB came with the 12A.

How much horsepower does the Mazda RX-7 FB have?

The Mazda RX-7 FB makes 128 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Mazda RX-7 FB?

The Mazda RX-7 FB uses a 4x110 bolt pattern with a — mm hub bore and M12x1.5 lug thread.

What are the common problems with the Mazda 12A rotary?

Apex seal wear; do a rotary compression test before buying. Ignition and carburetor setup drift with age.

Where should I start building a Mazda RX-7 FB?

Rust, compression test, carb. Compression test, then rust.

How much power can a Mazda RX-7 FB make, and what does it cost?

A full build (13B swap (NA or turbo)) typically makes 250+ whp, for roughly 10,000–25,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Mazda RX-7 FB

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.