DWNSHFT

Mitsubishi Lancer Evolution Evo VI

Evolution VI · 1999–2001

Engine
4G63T
Power
276 hp
Curb weight
1,360 kg
Bolt pattern (PCD)
5x114.3
Mitsubishi Lancer Evolution Evo VI

Photo: Interesting.cars.insta · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Mitsubishi Lancer Evolution Evo VI was built from 1999–2001. Engines: 4G63T. Factory output is 276 hp (Japanese-market figures). Wheels bolt on with a 5x114.3 pattern, 67.1 mm hub bore and M12x1.5 lug thread.

History

The Evolution VI arrived in 1999, refining the Evo V's wider body with revised aerodynamics, cooling and suspension for World Rally Championship homologation. Under the hood was the proven 4G63 turbo four driving all four wheels.

Tommi Mäkinen won four consecutive WRC drivers' titles from 1996 to 1999 in Lancer Evolutions, and Mitsubishi celebrated with the Evo VI Tommi Mäkinen Edition. Evos weren't sold in North America until the Evo VIII, which makes JDM Evo VIs prized imports now that they are legal.

Build guide

Mitsubishi Lancer Evolution IV–VI

4G63T (TD05HR)

The Evos that dominated the WRC. Active Yaw Control (AYC) arrived on the GSR and the VI Tommi Makinen Edition is the collectible one. The 4G63 tuning path is the same as earlier cars, with stronger turbos from the factory.

  1. Stage 0 · BaselineStock (~280 PS)Belts, AYC check, fluids.~$2,000–5,000 CAD
  2. Stage 1 · Street~260–300 whpExhaust, ECU, chassis.~$3,000–6,000 CAD
  3. Stage 2 · Spirited / Track~350–420 whpTurbo, fuel, clutch.~$6,000–12,000 CAD
  4. Stage 3 · Full build450–550 whpBuilt engine and gearbox.~$15,000–30,000 CAD
Check before modifying (4)
  • AYC pump failures; check the AYC warning light and pump operation.
  • Timing and balance-shaft belts.
  • 5MT synchro wear, especially 2nd and 3rd.
  • Rust on rear arches and sills.
Read the full Mitsubishi Lancer Evolution IV–VI build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Mitsubishi Lancer Evolution Evo VI, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work17×8 +38235/45R1717×8 +38235/45R17Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×9.5 +38255/35R1818×9.5 +38255/35R18Fender roll
AggressivePoke and stance18×10 +30265/35R1818×10 +30265/35R18Fender roll, Fender pull, Negative camber, Coilovers

Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Mitsubishi 4G63T

Turbo

Bolt-on turbo upgrades, then a 2.2–2.3 L stroker for 600+ hp.

  1. Stage 1 · Bolt-ons300–330 hp
    • Boost controller
    • Intake
    • Downpipe
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods350–450 hp
    • Upgraded turbo
    • Fuel pump
    • Injectors
    • Front-mount intercooler
    • Clutch
  3. Stage 3 · Big power500–700 hp
    • Built bottom end
    • Stroker kit
    • Head studs
    • Standalone ECU

Known weak points

  • Cracked exhaust manifolds and tired turbos on old cars.
  • Balance shaft and timing belt service (often deleted on builds).
More about the Mitsubishi 4G63T →

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
GSRCP9A4G63TAWD276 hp5x114.31999–2001

Stock spec sheet

Evo VI GSRCP9A

Japan (JDM)1999–2001

Engine & drivetrain

Engine
4G63T
Displacement
1,997 cc (2 L)
Aspiration
Turbo
Bore × stroke
85 × 88 mm
Compression
8.8:1
Transmission
5MT
Drivetrain
All-wheel drive (AWD)
Differential
AYC rear, viscous centre

Stock performance

Power
276 hp (206 kW) @ 6,500 rpm
Torque
373 N·m (275 lb-ft) @ 3,000 rpm
Curb weight
1,360 kg (2,998 lb)
Weight per hp
4.9 kg/hp (10.9 lb/hp)
Fuel tank
50 L (13.2 US gal)

Factory wheels & tires

Wheels
17x7.5
Tires
225/45ZR17
Tire diameter
634 mm (25 in)
Bolt pattern (PCD)
5x114.3
Center bore
67.1 mm
Lug thread
M12x1.5

Dimensions

Length
4,350 mm (171.3 in)
Width
1,770 mm (69.7 in)
Height
1,405 mm (55.3 in)
Wheelbase
2,510 mm (98.8 in)

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Mitsubishi Lancer Evolution Evo VI have?

The Mitsubishi Lancer Evolution Evo VI came with the 4G63T.

How much horsepower does the Mitsubishi Lancer Evolution Evo VI have?

The Mitsubishi Lancer Evolution Evo VI makes 276 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Mitsubishi Lancer Evolution Evo VI?

The Mitsubishi Lancer Evolution Evo VI uses a 5x114.3 bolt pattern with a 67.1 mm hub bore and M12x1.5 lug thread.

What size wheels fit the Mitsubishi Lancer Evolution Evo VI without rolling the fenders?

About 17x8 +38 (235/45R17) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are the common problems with the Mitsubishi 4G63T?

Cracked exhaust manifolds and tired turbos on old cars. Balance shaft and timing belt service (often deleted on builds).

Where should I start building a Mitsubishi Lancer Evolution Evo VI?

Belts, AYC check, fluids. Belts, then AYC, then fluids.

How much power can a Mitsubishi Lancer Evolution Evo VI make, and what does it cost?

A full build (Built engine and gearbox) typically makes 450–550 whp, for roughly 15,000–30,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Mitsubishi Lancer Evolution Evo VI

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.