DWNSHFT

Toyota Chaser JZX90

X90 · 1992–1996

Engine
1JZ-GTE
Power
276 hp
Bolt pattern (PCD)
5x114.3
Toyota Chaser JZX90

Photo: Tokumeigakarinoaoshima · CC0 · Wikimedia Commons

Key facts

The Toyota Chaser JZX90 was built from 1992–1996. Engines: 1JZ-GTE. Factory output is 276 hp (Japanese-market figures). Wheels bolt on with a 5x114.3 pattern, 60.1 mm hub bore and M12x1.5 lug thread.

Build guide

Toyota Chaser / Mark II Tourer V (JZX90)

1JZ-GTE (non-VVTi, twin CT12A)

A four-door FR sedan with a turbo inline-6 and an R154 manual. It's a drift and street favourite. The non-VVTi 1JZ makes good power once the ceramic twins are replaced with a single turbo. The chassis wants coilovers, angle and a proper LSD.

  1. Stage 0 · BaselineStock (~280 PS)Fresh timing service, cooling and bushings.~$1,500–3,500 CAD
  2. Stage 1 · Street~230–260 whpExhaust, intake, boost controller on the stock twins.~$2,000–4,000 CAD
  3. Stage 2 · Spirited / Track~350–450 whpSingle turbo, FMIC, fuel and ECU.~$7,000–14,000 CAD
  4. Stage 3 · Full build500–700 whpBuilt 1JZ or 2JZ swap for 500+ whp competition use.~$18,000–40,000 CAD
Check before modifying (3)
  • Ceramic CT12A turbines shed with extra boost; treat ~0.8–1.0 bar as the limit on stock twins.
  • Timing belt is interference; coil-pack and igniter faults; cracked dash and failing climate control.
  • Many are automatics; manual swaps (R154) are common and well documented.
Read the full Toyota Chaser / Mark II Tourer V (JZX90) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Toyota Chaser JZX90, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work17×8 +35225/45R1717×8 +35225/45R17Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×9 +25235/40R1818×9.5 +25245/40R18Fender roll, Negative camber
AggressivePoke and stance18×9.5 +12245/40R1818×10.5 +12265/35R18Fender roll, Fender pull, Negative camber, Coilovers

Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Toyota 1JZ-GTE

Turbo

A single turbo on the stock bottom end: 450–500 hp is common.

  1. Stage 1 · Bolt-ons300–330 hp
    • Boost controller
    • Intake
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods350–400 hp
    • Front-mount intercooler
    • Fuel pump
    • Injectors
    • Clutch
  3. Stage 3 · Big power450–600 hp
    • Single-turbo conversion
    • Standalone ECU
    • E85 / flex fuel

Known weak points

  • Early twin-turbo engines use ceramic turbine wheels that shatter with extra boost.
  • Stock fuel pump and injectors run out around 350–400 hp.
More about the Toyota 1JZ-GTE →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
Tourer VJZX901JZ-GTEFR276 hp5x114.31992–1996

Stock spec sheet

JZX90 Tourer VJZX90

Japan (JDM)1992–1996

Engine & drivetrain

Engine
1JZ-GTE
Displacement
2,491 cc (2.5 L)
Aspiration
Twin-turbo
Bore × stroke
86 × 71.5 mm
Compression
8.5:1
Transmission
5MT / 4AT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
276 hp (206 kW) @ 6,200 rpm
Torque
363 N·m (268 lb-ft) @ 4,800 rpm

Factory wheels & tires

Bolt pattern (PCD)
5x114.3
Center bore
60.1 mm
Lug thread
M12x1.5

Dimensions

Wheelbase
2,730 mm (107.5 in)

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Toyota Chaser JZX90 have?

The Toyota Chaser JZX90 came with the 1JZ-GTE.

How much horsepower does the Toyota Chaser JZX90 have?

The Toyota Chaser JZX90 makes 276 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Toyota Chaser JZX90?

The Toyota Chaser JZX90 uses a 5x114.3 bolt pattern with a 60.1 mm hub bore and M12x1.5 lug thread.

What size wheels fit the Toyota Chaser JZX90 without rolling the fenders?

About 17x8 +35 (225/45R17) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Toyota Chaser JZX90?

Popular swaps include 2JZ-GTE, 1JZ-GTE VVT-i.

What are the common problems with the Toyota 1JZ-GTE?

Early twin-turbo engines use ceramic turbine wheels that shatter with extra boost. Stock fuel pump and injectors run out around 350–400 hp.

Where should I start building a Toyota Chaser JZX90?

Fresh timing service, cooling and bushings. Timing belt and coolant system first. Inspect the turbos for shaft play and oil leaks.

How much power can a Toyota Chaser JZX90 make, and what does it cost?

A full build (Built 1JZ or 2JZ swap for 500+ whp competition use) typically makes 500–700 whp, for roughly 18,000–40,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Toyota Chaser JZX90

No specialist shop for the Toyota Chaser JZX90 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.