DWNSHFT

Toyota MR2 AW11

AW11 (1st gen) · 1984–1989

Engine
4A-GZE
Power
143 hp
Bolt pattern (PCD)
4x100
Toyota MR2 AW11

Photo: SealyPhoto · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Toyota MR2 AW11 was built from 1984–1989. Engines: 4A-GZE. Factory output is 143 hp (Japanese-market figures). Wheels bolt on with a 4x100 pattern, 54.1 mm hub bore and M12x1.5 lug thread.

Build guide

Toyota MR2 G-Limited Supercharger (AW11)

4A-GZE (supercharged)

A light mid-engine car with a supercharged 4A-GZE. The easiest gain is a smaller supercharger pulley, with fuel and timing to match. It's great for autocross; rust and old cooling lines are the enemy.

  1. Stage 0 · BaselineStock (~145 PS)Rust, cooling system bleed, timing service.~$1,500–3,500 CAD
  2. Stage 1 · Street~+10 hpExhaust and chassis.~$1,500–3,000 CAD
  3. Stage 2 · Spirited / Track~150–180 whpPulley, fuel and ignition.~$2,500–5,000 CAD
  4. Stage 3 · Full build200+ whpBuilt 4A-GZE or swap (20V, 3S, 2ZZ).~$8,000–18,000 CAD
Check before modifying (3)
  • Rust (rear, around the engine bay and floors).
  • Long coolant pipes running front to rear; air pockets and leaks.
  • Supercharger oil and clutch condition.
Read the full Toyota MR2 G-Limited Supercharger (AW11) build guide →

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Toyota 4A-GZE

Supercharged

A smaller supercharger pulley plus an intercooler upgrade is the go-to first step.

  1. Stage 1 · Bolt-ons150–165 hp
    • Smaller pulley
    • Intake
    • Exhaust
  2. Stage 2 · Supporting mods170–190 hp
    • Intercooler upgrade
    • Fuel pump
    • Injectors
    • ECU tune
  3. Stage 3 · Big power200–230 hp
    • Turbo kit
    • Standalone ECU

Known weak points

  • The SC12 supercharger and its magnetic clutch wear out.
  • Stock fuel system runs out quickly with more boost.
More about the Toyota 4A-GZE →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
G-Limited SuperchargerAW114A-GZEMR143 hp4x1001986–1989

Stock spec sheet

AW11 G-Limited SuperchargerAW11

Japan (JDM)1986–1989

Engine & drivetrain

Engine
4A-GZE
Displacement
1,587 cc (1.6 L)
Aspiration
Supercharged
Bore × stroke
81 × 77 mm
Compression
8:1
Transmission
5MT
Drivetrain
Mid-engine, RWD (MR)

Stock performance

Power
143 hp (107 kW) @ 6,400 rpm
Torque
186 N·m (137 lb-ft) @ 4,400 rpm

Factory wheels & tires

Bolt pattern (PCD)
4x100
Center bore
54.1 mm
Lug thread
M12x1.5

Dimensions

Length
3,950 mm (155.5 in)
Width
1,665 mm (65.6 in)
Height
1,250 mm (49.2 in)
Wheelbase
2,320 mm (91.3 in)

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Toyota MR2 AW11 have?

The Toyota MR2 AW11 came with the 4A-GZE.

How much horsepower does the Toyota MR2 AW11 have?

The Toyota MR2 AW11 makes 143 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Toyota MR2 AW11?

The Toyota MR2 AW11 uses a 4x100 bolt pattern with a 54.1 mm hub bore and M12x1.5 lug thread.

What are popular engine swaps for the Toyota MR2 AW11?

Popular swaps include 4A-GZE.

What are the common problems with the Toyota 4A-GZE?

The SC12 supercharger and its magnetic clutch wear out. Stock fuel system runs out quickly with more boost.

Where should I start building a Toyota MR2 AW11?

Rust, cooling system bleed, timing service. Rust repair first, then cooling, then timing service.

How much power can a Toyota MR2 AW11 make, and what does it cost?

A full build (Built 4A-GZE or swap (20V, 3S, 2ZZ)) typically makes 200+ whp, for roughly 8,000–18,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Toyota MR2 AW11

No specialist shop for the Toyota MR2 AW11 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.