DWNSHFT

Build guide

Toyota GR Supra A90 (Mk5)

Engine: B58 3.0 turbo I6 (RZ) / B48 2.0 turbo I4 (SZ-R)

The BMW-sourced B58 responds hugely to software. Stage 1 alone adds about 20–25%, and ethanol blends add more. The ZF 8-speed auto handles big torque with a transmission tune. Most builds stay on the factory turbo until the fuel system becomes the limit.

Toyota GR Supra A90 (Mk5)

Photo: Dietmar Rabich · CC BY-SA 4.0 · Wikimedia Commons

  1. Stage 0 · BaselineStock (335–382 hp RZ / 255 hp SZ-R)Stock car in good health; sort cooling and tires first.~$500–2,000 CAD
  2. Stage 1 · Street~+70–100 hp crank on 93 octane (RZ); ~+50 hp (SZ-R)Flash tune on the stock hardware.~$1,000–2,500 CAD
  3. Stage 2 · Spirited / Track~430–510 whp depending on fuel (E30–E40)Downpipe, cooling and ethanol on the stock turbo.~$4,000–9,000 CAD
  4. Stage 3 · Full build~550–650+ whp (hybrid or bolt-on turbo, E85)Upgraded turbo with port injection for E85.~$12,000–25,000 CAD

Check before modifying

  • Early 2020 cars use a two-port exhaust manifold B58 (335 hp). 2021+ cars use the single-port engine (382 hp). Tune files and results differ.
  • Some 2021+ ECUs needed a bench unlock before they could be flashed; confirm with your tuner.
  • The factory plastic charge pipe can crack at higher boost.
  • The factory direct-injection pump runs out of fuel above about E30–E40. Higher ethanol needs port injection.

Trim differences

  • SZ-R (B48) gets about +50–60 hp from a tune and downpipe. The steps are similar but the ceilings are lower.
  • 6MT cars (2023+ in some markets) are limited by the clutch sooner than the 8AT.
0

Baseline

Stock car in good health; sort cooling and tires first.

Power (estimate)
Stock (335–382 hp RZ / 255 hp SZ-R)
Parts budget
~$500–2,000 CAD

Engine

  • Shorter oil change interval with an LL-01/FE-approved oilToyota/BMW OEMLiqui MolyMotul

Wheels & tires

  • Quality summer tiresMichelin PS4SBridgestone

Electronics & tuning

  • OBD logger / gaugeMHDbootmod3EcuTek app

Order of work

  1. Read DME production date and engine variant before buying a tune.
  2. Baseline log (boost, timing, IAT) before any change.
1

Street

Flash tune on the stock hardware.

Power (estimate)
~+70–100 hp crank on 93 octane (RZ); ~+50 hp (SZ-R)
Parts budget
~$1,000–2,500 CAD

Electronics & tuning

  • ECU flash tunebootmod3MHDEcuTekActive Autowerke

Intake & exhaust

  • Charge pipe (metal)A preventive fix before more boost.WagnerVRSFMishimoto
  • IntakeEventuriaFeDinan

Brakes

  • Track pads + DOT 4 fluidFerodoHawkMotul

Order of work

  1. Replace the charge pipe first, then flash Stage 1 for your fuel octane.
  2. Log three pulls and check for timing corrections.
  3. An E30 blend adds more without hardware on most tunes.
2

Spirited / Track

Downpipe, cooling and ethanol on the stock turbo.

Power (estimate)
~430–510 whp depending on fuel (E30–E40)
Parts budget
~$4,000–9,000 CAD

Intake & exhaust

  • Downpipe (high-flow cat; catless = off-road only)Off-road / track onlyAkrapovicVRSFActive Autowerke

Cooling

  • Upgraded heat exchanger (air-to-water intercooler)CSFMishimotoWagner
  • Track-day cooling (oil cooler / larger radiator)CSFMishimoto

Fuel

  • Flex-fuel kit and upgraded low-pressure pumpFuel-ItMotiv Motorsport

Drivetrain

  • Transmission (ZF 8HP) tunexHPbootmod3 TCUEcuTek

Suspension

  • Coilovers or sway barsKWOhlinsEibachH&R

Order of work

  1. Heat exchanger and downpipe first, then the flex-fuel kit.
  2. Retune for the actual ethanol content. Stay at or below about E40 on the factory fuel system.
  3. TCU tune to raise the torque limiter and sharpen shifts.
3

Full build

Upgraded turbo with port injection for E85.

Power (estimate)
~550–650+ whp (hybrid or bolt-on turbo, E85)
Parts budget
~$12,000–25,000 CAD

Forced induction

  • Hybrid or bolt-on turbo kitPure 800AMS Alpha 6Vargas

Fuel

  • Port injection kitMotiv ReflexFuel-ItEOS/Dorch

Engine

  • Upgraded valve springs or rods for 700+ whpSupertechBrian Crower

Drivetrain

  • Clutch packs (8HP) or uprated clutch (6MT)xHP-calibrated packsSouth Bend

Interior

  • Bucket seats and harness barRecaroSparcoBride

Order of work

  1. Add port injection before raising ethanol past about E40.
  2. Fit the turbo, downpipe and heat exchanger together, then tune on a dyno.
  3. Check rear-diff and axle health on drag or launch builds.

Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.

Sources