Guide de préparation
Nissan 300ZX Twin Turbo (Z32)
Moteur: VG30DETT
A complex but capable twin-turbo GT. The engine bay is very tight, so many jobs mean pulling the intake or the engine. Fix ageing fuel lines and wiring before power, then build carefully.
Ce guide est en anglais pour l’instant.

Photo : Tokumeigakarinoaoshima · CC0 · Wikimedia Commons
- Étape 0 · BaseStock (~280 PS)Fuel hoses, timing belt, cooling.~$2,500–5,000 CAD
- Étape 1 · Rue~280–330 whpExhaust, intake, boost control.~$2,500–5,000 CAD
- Étape 2 · Sportive / Piste~380–480 whpFMIC, fuel, ECU, turbo upgrade.~$8,000–15,000 CAD
- Étape 3 · Préparation complète500+ whpBuilt VG30 with stronger turbos.~$18,000–35,000 CAD
À vérifier avant de modifier
- Ageing fuel injector hoses under the plenum can leak and start fires; replace them.
- Tight engine bay; turbo and timing jobs are labour-intensive.
- Wiring, power transistor and HICAS faults.
Base
Fuel hoses, timing belt, cooling.
- Puissance (estimation)
- Stock (~280 PS)
- Budget pièces
- ~$2,500–5,000 CAD
Alimentation
- Injector and fuel hosesNissan OEMGates
Moteur
- Timing belt and water pumpNissan OEMAisin
Refroidissement
- Radiator and hosesKoyoMishimoto
Ordre des travaux
- Fuel hoses first, then timing and cooling.
Rue
Exhaust, intake, boost control.
- Puissance (estimation)
- ~280–330 whp
- Budget pièces
- ~$2,500–5,000 CAD
Admission et échappement
- Downpipes and cat-backZ1 MotorsportsHKSStillen
Électronique et calibration
- Boost controllerHKSBlitz
Suspension
- Coilovers and HICAS lockTeinBC Racing
Freins
- Performance pads and DOT 4 fluidHawkProject MuMotul
Roues et pneus
- Quality 200TW performance tiresYokohamaBridgestoneFalken
Ordre des travaux
- Exhaust and boost control; wideband gauge.
Sportive / Piste
FMIC, fuel, ECU, turbo upgrade.
- Puissance (estimation)
- ~380–480 whp
- Budget pièces
- ~$8,000–15,000 CAD
Refroidissement
- Front-mount intercoolerZ1 MotorsportsMishimoto
Suralimentation
- Upgraded twin turbosGarrett GT2560RZ1
Alimentation
- Injectors and pumpsInjector DynamicsWalbro
Électronique et calibration
- ECU (Nistune or standalone)NistuneHaltech
Transmission
- Uprated clutchExedyZ1
Ordre des travaux
- Fuel and ECU, then turbos and FMIC.
Préparation complète
Built VG30 with stronger turbos.
- Puissance (estimation)
- 500+ whp
- Budget pièces
- ~$18,000–35,000 CAD
Moteur
- Forged internals, ARP studsCPManleyARP
Transmission
- Rear diff and axlesZ1Driveshaft Shop
Intérieur
- Bucket seats, harnesses, roll bar or cageBrideSparcoCusco
Ordre des travaux
- Engine and driveline together.
Les chiffres de puissance et de budget sont des estimations (pièces seulement, en $ CA), pas des garanties : le carburant, la calibration, le climat et le choix des pièces changent tout. Les marques sont des exemples, pas des commandites. Retirer ou vider les catalyseurs, ou désactiver les systèmes antipollution, est illégal sur les voitures de route au Canada et aux États-Unis; les pièces marquées « hors route / piste seulement » sont réservées aux véhicules de compétition.