Guide de préparation
Toyota MR-S / MR2 Spyder (ZZW30)
Moteur: 1ZZ-FE
A light, cheap mid-engine roadster that's mostly about handling. The pre-cat failure on early cars must be dealt with first. Power builds either turbocharge the 1ZZ at low boost or swap in a 2ZZ-GE.
Ce guide est en anglais pour l’instant.

Photo : MercurySable99 · CC BY-SA 4.0 · Wikimedia Commons
- Étape 0 · BaseStock (~140 PS)Pre-cat check or replacement, oil consumption, mounts.~$1,000–3,000 CAD
- Étape 1 · Rue~+5 hpChassis and brakes.~$1,500–3,500 CAD
- Étape 2 · Sportive / Piste~170–200 whpLow-boost turbo on the 1ZZ, or a 2ZZ-GE swap.~$5,000–10,000 CAD
- Étape 3 · Préparation complète250+ whpBuilt engine (2ZZ or 1ZZ) with turbo for 250+ whp.~$12,000–25,000 CAD
À vérifier avant de modifier
- Early (2000–2002) cars suffer pre-cat breakdown; debris can be pulled into the engine. Worn rings and oil burning are the root cause.
- Oil consumption on 1ZZ-FE; check level often.
- SMT (sequential manual) actuator problems; manual cars are simpler.
- Shallow oil pan and mid-engine layout can starve oil in long corners.
Base
Pre-cat check or replacement, oil consumption, mounts.
- Puissance (estimation)
- Stock (~140 PS)
- Budget pièces
- ~$1,000–3,000 CAD
Admission et échappement
- Replacement header with legal catOEMTRDaftermarket
Moteur
- Oil pan bafflevarious
- Engine and transmission mountsToyota OEM
Ordre des travaux
- Compression test and pre-cat inspection, then header and oil baffle.
Rue
Chassis and brakes.
- Puissance (estimation)
- ~+5 hp
- Budget pièces
- ~$1,500–3,500 CAD
Suspension
- Coilovers and sway barsTeinBC RacingWhiteline
Freins
- Pads, lines, fluidHawkEBCMotul
Roues et pneus
- Performance tiresYokohamaFalken
Ordre des travaux
- Coilovers and alignment; tires and brakes.
Sportive / Piste
Low-boost turbo on the 1ZZ, or a 2ZZ-GE swap.
- Puissance (estimation)
- ~170–200 whp
- Budget pièces
- ~$5,000–10,000 CAD
Suralimentation
- Low-boost turbo kit (~6–8 psi)various
Moteur
- 2ZZ-GE swap with 6MTswap kits
Électronique et calibration
- Engine managementLinkHaltech
Refroidissement
- Oil coolerMishimotoSetrab
Ordre des travaux
- Pick the swap or the turbo path; add cooling and oil control either way.
Préparation complète
Built engine (2ZZ or 1ZZ) with turbo for 250+ whp.
- Puissance (estimation)
- 250+ whp
- Budget pièces
- ~$12,000–25,000 CAD
Moteur
- Forged internalsCPWiseco
Transmission
- LSD and uprated clutchQuaifeExedy
Intérieur
- Roll bar and seatsHard DogSparco
Ordre des travaux
- Engine and LSD together, then a roll bar.
Les chiffres de puissance et de budget sont des estimations (pièces seulement, en $ CA), pas des garanties : le carburant, la calibration, le climat et le choix des pièces changent tout. Les marques sont des exemples, pas des commandites. Retirer ou vider les catalyseurs, ou désactiver les systèmes antipollution, est illégal sur les voitures de route au Canada et aux États-Unis; les pièces marquées « hors route / piste seulement » sont réservées aux véhicules de compétition.