DWNSHFT

Subaru Impreza GD

GD (2nd gen) · 2000–2007

Engine
EJ207
Power
276 hp
Curb weight
1,430 kg
Bolt pattern (PCD)
5x100 / 5x114.3
Subaru Impreza GD

Photo: Tokumeigakarinoaoshima · CC0 · Wikimedia Commons

Key facts

The Subaru Impreza GD was built from 2000–2007. Engines: EJ207. Factory output is 276 hp (Japanese-market figures). Wheels bolt on with a 5x100 / 5x114.3 pattern, 56.1 mm hub bore and M12x1.25 lug thread.

Build guide

Subaru Impreza WRX STI (GDB)

EJ207

The bugeye, blobeye and hawkeye STI has the strong 6MT and Driver Controlled Centre Differential (DCCD). The EJ207 makes good power with careful, logged tuning. Oil control and knock are the two things that decide engine life.

  1. Stage 0 · BaselineStock (~280 PS)Compression, timing belt, oil pickup.~$2,000–5,000 CAD
  2. Stage 1 · Street~260–300 whpExhaust, intake, tune; chassis.~$3,000–6,000 CAD
  3. Stage 2 · Spirited / Track~340–400 whpTurbo, fuel, intercooler, oil cooling.~$7,000–14,000 CAD
  4. Stage 3 · Full build450–550 whpBuilt EJ.~$15,000–35,000 CAD
Check before modifying (3)
  • EJ knock sensitivity; ringland and rod-bearing failures follow aggressive tunes.
  • Oil pickup O-ring and oil starvation on track.
  • Rust on rear arches and sills in salt-belt cars.
Read the full Subaru Impreza WRX STI (GDB) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Subaru Impreza GD, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work17×8 +48235/45R1717×8 +48235/45R17Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×8.5 +48245/40R1818×8.5 +48245/40R18Fender roll
AggressivePoke and stance18×9.5 +40255/35R1818×9.5 +40255/35R18Fender roll, Negative camber, Coilovers

5x100 until 2004, 5x114.3 from 2005. Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Subaru EJ20 / EJ207

Turbo

An upgraded turbo and a conservative tune; build the bottom end before big power.

  1. Stage 1 · Bolt-ons300–330 hp
    • Boost controller
    • Intake
    • Downpipe
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods350–400 hp
    • Upgraded turbo
    • Fuel pump
    • Injectors
    • Intercooler upgrade
  3. Stage 3 · Big power450+ hp
    • Built bottom end
    • Head studs
    • Standalone ECU
    • E85 / flex fuel

Known weak points

  • Ringland failure from detonation; tune carefully and watch knock.
  • Rod bearings and oil starvation under hard track use.
More about the Subaru EJ20 / EJ207 →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
WRX STIGDBEJ207AWD276 hp5x100 / 5x114.32000–2007

Stock spec sheet

GD WRX STIGDB

Japan (JDM)2000–2004

Engine & drivetrain

Engine
EJ207
Displacement
1,994 cc (2 L)
Aspiration
Turbo
Bore × stroke
92 × 75 mm
Compression
8:1
Transmission
6MT
Drivetrain
All-wheel drive (AWD)
Differential
DCCD centre

Stock performance

Power
276 hp (206 kW) @ 6,400 rpm
Torque
382 N·m (282 lb-ft) @ 4,000 rpm
Curb weight
1,430 kg (3,153 lb)
Weight per hp
5.2 kg/hp (11.4 lb/hp)
Fuel tank
60 L (15.9 US gal)

Factory wheels & tires

Wheels
17x7.5
Tires
225/45R17
Tire diameter
634 mm (25 in)
Bolt pattern (PCD)
5x100
Center bore
56.1 mm
Lug thread
M12x1.25

Dimensions

Length
4,465 mm (175.8 in)
Width
1,740 mm (68.5 in)
Height
1,425 mm (56.1 in)
Wheelbase
2,525 mm (99.4 in)

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Subaru Impreza GD have?

The Subaru Impreza GD came with the EJ207.

How much horsepower does the Subaru Impreza GD have?

The Subaru Impreza GD makes 276 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Subaru Impreza GD?

The Subaru Impreza GD uses a 5x100 / 5x114.3 bolt pattern with a 56.1 mm hub bore and M12x1.25 lug thread.

What size wheels fit the Subaru Impreza GD without rolling the fenders?

About 17x8 +48 (235/45R17) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Subaru Impreza GD?

Popular swaps include EJ257 (US STI 2.5).

What are the common problems with the Subaru EJ20 / EJ207?

Ringland failure from detonation; tune carefully and watch knock. Rod bearings and oil starvation under hard track use.

Where should I start building a Subaru Impreza GD?

Compression, timing belt, oil pickup. Compression test, timing belt, oil pickup.

How much power can a Subaru Impreza GD make, and what does it cost?

A full build (Built EJ) typically makes 450–550 whp, for roughly 15,000–35,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Subaru Impreza GD

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.