DWNSHFT

Subaru Impreza GR

GR / GV (3rd gen) · 2007–2014

Engine
EJ207
Power
304 hp
Curb weight
1,480 kg
Bolt pattern (PCD)
5x114.3
Subaru Impreza GR

Photo: Tokumeigakarinoaoshima · CC0 · Wikimedia Commons

Key facts

The Subaru Impreza GR was built from 2007–2014. Engines: EJ207. Factory output is 304 hp (Japanese-market figures). Wheels bolt on with a 5x114.3 pattern, 56.1 mm hub bore and M12x1.25 lug thread.

Build guide

Subaru Impreza WRX STI (GRB)

EJ207

The hatchback STI shares the EJ207, 6MT and DCCD with the GD. It's heavier but more stable, and builds follow the same steps.

  1. Stage 0 · BaselineStock (~308 PS)Compression, timing belt, oil system.~$2,000–5,000 CAD
  2. Stage 1 · Street~280–320 whpExhaust, tune, chassis.~$3,000–6,000 CAD
  3. Stage 2 · Spirited / Track~350–400 whpTurbo, fuel, intercooler.~$7,000–14,000 CAD
  4. Stage 3 · Full build450–550 whpBuilt EJ.~$15,000–35,000 CAD
Check before modifying (3)
  • EJ knock sensitivity; ringland and rod-bearing failures.
  • Oil pickup and oil starvation on track.
  • Engine mounts and rear diff noise with age.
Read the full Subaru Impreza WRX STI (GRB) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Subaru Impreza GR, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work18×8.5 +48245/40R1818×8.5 +48245/40R18Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×9.5 +40265/35R1818×9.5 +40265/35R18Fender roll
AggressivePoke and stance18×10 +38275/35R1818×10 +38275/35R18Fender roll, Fender pull, Negative camber, Coilovers

Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Subaru EJ20 / EJ207

Turbo

An upgraded turbo and a conservative tune; build the bottom end before big power.

  1. Stage 1 · Bolt-ons300–330 hp
    • Boost controller
    • Intake
    • Downpipe
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods350–400 hp
    • Upgraded turbo
    • Fuel pump
    • Injectors
    • Intercooler upgrade
  3. Stage 3 · Big power450+ hp
    • Built bottom end
    • Head studs
    • Standalone ECU
    • E85 / flex fuel

Known weak points

  • Ringland failure from detonation; tune carefully and watch knock.
  • Rod bearings and oil starvation under hard track use.
More about the Subaru EJ20 / EJ207 →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
WRX STIGRBEJ207AWD304 hp5x114.32007–2014

Stock spec sheet

GR WRX STIGRB

Japan (JDM)2007–2014

Engine & drivetrain

Engine
EJ207
Displacement
1,994 cc (2 L)
Aspiration
Turbo
Bore × stroke
92 × 75 mm
Compression
8:1
Transmission
6MT
Drivetrain
All-wheel drive (AWD)
Differential
DCCD centre

Stock performance

Power
304 hp (227 kW) @ 6,400 rpm
Torque
422 N·m (311 lb-ft) @ 4,400 rpm
Curb weight
1,480 kg (3,263 lb)
Weight per hp
4.9 kg/hp (10.7 lb/hp)
Fuel tank
60 L (15.9 US gal)

Factory wheels & tires

Wheels
18x8.5 ET55
Tires
245/40R18
Tire diameter
653 mm (25.7 in)
Bolt pattern (PCD)
5x114.3
Center bore
56.1 mm
Lug thread
M12x1.25

Dimensions

Length
4,415 mm (173.8 in)
Width
1,795 mm (70.7 in)
Height
1,475 mm (58.1 in)
Wheelbase
2,625 mm (103.3 in)

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Subaru Impreza GR have?

The Subaru Impreza GR came with the EJ207.

How much horsepower does the Subaru Impreza GR have?

The Subaru Impreza GR makes 304 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Subaru Impreza GR?

The Subaru Impreza GR uses a 5x114.3 bolt pattern with a 56.1 mm hub bore and M12x1.25 lug thread.

What size wheels fit the Subaru Impreza GR without rolling the fenders?

About 18x8.5 +48 (245/40R18) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Subaru Impreza GR?

Popular swaps include EJ257 (US STI 2.5).

What are the common problems with the Subaru EJ20 / EJ207?

Ringland failure from detonation; tune carefully and watch knock. Rod bearings and oil starvation under hard track use.

Where should I start building a Subaru Impreza GR?

Compression, timing belt, oil system. Compression test, timing belt, oil system.

How much power can a Subaru Impreza GR make, and what does it cost?

A full build (Built EJ) typically makes 450–550 whp, for roughly 15,000–35,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Subaru Impreza GR

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.