DWNSHFT

Toyota Mark II JZX100

X100 · 1996–2000

Engine
1JZ-GTE
Power
276 hp
Curb weight
1,510 kg
Bolt pattern (PCD)
5x114.3
Toyota Mark II JZX100

Photo: ChengH · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Toyota Mark II JZX100 was built from 1996–2000. Engines: 1JZ-GTE. Factory output is 276 hp (Japanese-market figures). Wheels bolt on with a 5x114.3 pattern, 60.1 mm hub bore and M12x1.5 lug thread.

Build guide

Toyota Chaser / Mark II Tourer V (JZX100)

1JZ-GTE VVT-i (single CT15B)

The JZX100 Tourer V is one of the defining drift and street sedans. The VVT-i 1JZ swapped the twins for a single CT15B, and it spools well at 1 bar. Bolt-on CT15B upgrades and simple single-turbo kits make 400+ whp easy.

  1. Stage 0 · BaselineStock (~280 PS)Timing service, coils and cooling.~$1,500–3,500 CAD
  2. Stage 1 · Street~260–300 whpExhaust, intake and boost to ~1 bar.~$2,000–4,500 CAD
  3. Stage 2 · Spirited / Track~350–480 whpUpgraded CT15B or small single turbo, fuel and ECU.~$6,000–14,000 CAD
  4. Stage 3 · Full build500–700 whpBuilt 1JZ / 2JZ swap and a competition drivetrain.~$18,000–40,000 CAD
Check before modifying (3)
  • CT15B uses a ceramic turbine; keep stock boost near 1 bar or replace.
  • Coil packs, VVT-i oil control valve, timing belt (interference).
  • Factory ECU boost cut; many cars already carry old piggyback hacks to undo.
Read the full Toyota Chaser / Mark II Tourer V (JZX100) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Toyota Mark II JZX100, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work17×8 +35225/45R1717×8 +35225/45R17Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×9 +25235/40R1818×9.5 +25245/40R18Fender roll, Negative camber
AggressivePoke and stance18×9.5 +12245/40R1818×10.5 +12265/35R18Fender roll, Fender pull, Negative camber, Coilovers

Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Toyota 1JZ-GTE

Turbo

A single turbo on the stock bottom end: 450–500 hp is common.

  1. Stage 1 · Bolt-ons300–330 hp
    • Boost controller
    • Intake
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods350–400 hp
    • Front-mount intercooler
    • Fuel pump
    • Injectors
    • Clutch
  3. Stage 3 · Big power450–600 hp
    • Single-turbo conversion
    • Standalone ECU
    • E85 / flex fuel

Known weak points

  • Early twin-turbo engines use ceramic turbine wheels that shatter with extra boost.
  • Stock fuel pump and injectors run out around 350–400 hp.
More about the Toyota 1JZ-GTE →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
Tourer VJZX1001JZ-GTEFR276 hp5x114.31996–2000

Stock spec sheet

JZX100 Tourer VJZX100

Japan (JDM)1996–2000

Engine & drivetrain

Engine
1JZ-GTE
Displacement
2,491 cc (2.5 L)
Aspiration
Turbo
Bore × stroke
86 × 71.5 mm
Compression
9:1
Transmission
5MT / 4AT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
276 hp (206 kW) @ 6,200 rpm
Torque
378 N·m (279 lb-ft) @ 2,400 rpm
Curb weight
1,510 kg (3,329 lb)
Weight per hp
5.5 kg/hp (12.1 lb/hp)

Factory wheels & tires

Wheels
16"
Bolt pattern (PCD)
5x114.3
Center bore
60.1 mm
Lug thread
M12x1.5

Dimensions

Length
4,760 mm (187.4 in)
Width
1,755 mm (69.1 in)
Height
1,400 mm (55.1 in)
Wheelbase
2,730 mm (107.5 in)

Single-turbo VVT-i 1JZ-GTE.

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Toyota Mark II JZX100 have?

The Toyota Mark II JZX100 came with the 1JZ-GTE.

How much horsepower does the Toyota Mark II JZX100 have?

The Toyota Mark II JZX100 makes 276 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Toyota Mark II JZX100?

The Toyota Mark II JZX100 uses a 5x114.3 bolt pattern with a 60.1 mm hub bore and M12x1.5 lug thread.

What size wheels fit the Toyota Mark II JZX100 without rolling the fenders?

About 17x8 +35 (225/45R17) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Toyota Mark II JZX100?

Popular swaps include 2JZ-GTE, 1JZ-GTE VVT-i.

What are the common problems with the Toyota 1JZ-GTE?

Early twin-turbo engines use ceramic turbine wheels that shatter with extra boost. Stock fuel pump and injectors run out around 350–400 hp.

Where should I start building a Toyota Mark II JZX100?

Timing service, coils and cooling. Timing belt, then cooling, then a baseline dyno.

How much power can a Toyota Mark II JZX100 make, and what does it cost?

A full build (Built 1JZ / 2JZ swap and a competition drivetrain) typically makes 500–700 whp, for roughly 18,000–40,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Toyota Mark II JZX100

No specialist shop for the Toyota Mark II JZX100 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.