DWNSHFT

Toyota Mark II JZX110

X110 · 2000–2004

Engine
1JZ-GTE
Power
276 hp
Bolt pattern (PCD)
5x114.3
Toyota Mark II JZX110

Photo: Tokumeigakarinoaoshima · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Toyota Mark II JZX110 was built from 2000–2004. Engines: 1JZ-GTE. Factory output is 276 hp (Japanese-market figures). Wheels bolt on with a 5x114.3 pattern, 60.1 mm hub bore and M12x1.5 lug thread.

Build guide

Toyota Mark II iR-V (JZX110)

1JZ-GTE VVT-i (single turbo)

The last 1JZ Mark II carries over the VVT-i turbo engine from the JZX100 in a stiffer, more modern shell. Parts support is thinner than for the JZX100, but most engine parts are shared.

  1. Stage 0 · BaselineStock (~280 PS)Timing service, coils and cooling.~$1,500–3,500 CAD
  2. Stage 1 · Street~260–300 whpExhaust, boost control and chassis basics.~$2,500–5,000 CAD
  3. Stage 2 · Spirited / Track~350–450 whpUpgraded turbo, FMIC, fuel, ECU.~$7,000–14,000 CAD
  4. Stage 3 · Full build500+ whpBuilt 1JZ or 2JZ swap.~$18,000–35,000 CAD
Check before modifying (3)
  • Same 1JZ VVT-i points as the JZX100 (ceramic turbo, coils, timing belt).
  • Many are automatic; check for manual conversion quality.
  • Body-specific parts (bumpers, some suspension) are rarer than JZX100.
Read the full Toyota Mark II iR-V (JZX110) build guide →

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Toyota 1JZ-GTE

Turbo

A single turbo on the stock bottom end: 450–500 hp is common.

  1. Stage 1 · Bolt-ons300–330 hp
    • Boost controller
    • Intake
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods350–400 hp
    • Front-mount intercooler
    • Fuel pump
    • Injectors
    • Clutch
  3. Stage 3 · Big power450–600 hp
    • Single-turbo conversion
    • Standalone ECU
    • E85 / flex fuel

Known weak points

  • Early twin-turbo engines use ceramic turbine wheels that shatter with extra boost.
  • Stock fuel pump and injectors run out around 350–400 hp.
More about the Toyota 1JZ-GTE →

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
iR-VJZX1101JZ-GTEFR276 hp5x114.32000–2004

Stock spec sheet

JZX110 iR-VJZX110

Japan (JDM)2000–2004

Engine & drivetrain

Engine
1JZ-GTE
Displacement
2,491 cc (2.5 L)
Aspiration
Turbo
Bore × stroke
86 × 71.5 mm
Compression
9:1
Transmission
5MT / 4AT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
276 hp (206 kW) @ 6,200 rpm
Torque
378 N·m (279 lb-ft) @ 2,400 rpm

Factory wheels & tires

Bolt pattern (PCD)
5x114.3
Center bore
60.1 mm
Lug thread
M12x1.5

Dimensions

Length
4,735 mm (186.4 in)
Width
1,760 mm (69.3 in)
Height
1,460 mm (57.5 in)
Wheelbase
2,780 mm (109.4 in)

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Toyota Mark II JZX110 have?

The Toyota Mark II JZX110 came with the 1JZ-GTE.

How much horsepower does the Toyota Mark II JZX110 have?

The Toyota Mark II JZX110 makes 276 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Toyota Mark II JZX110?

The Toyota Mark II JZX110 uses a 5x114.3 bolt pattern with a 60.1 mm hub bore and M12x1.5 lug thread.

What are the common problems with the Toyota 1JZ-GTE?

Early twin-turbo engines use ceramic turbine wheels that shatter with extra boost. Stock fuel pump and injectors run out around 350–400 hp.

Where should I start building a Toyota Mark II JZX110?

Timing service, coils and cooling. Timing belt and cooling, then a baseline.

How much power can a Toyota Mark II JZX110 make, and what does it cost?

A full build (Built 1JZ or 2JZ swap) typically makes 500+ whp, for roughly 18,000–35,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Toyota Mark II JZX110

No specialist shop for the Toyota Mark II JZX110 in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.