Build guide
Toyota MR2 GT (SW20)
Engine: 3S-GTE (gen 2 CT26 early; gen 3 CT20B from 1994)
The mid-engine turbo MR2. Its reputation for snap oversteer is mostly a matter of tires, alignment and tired bushings. The 3S-GTE makes 300+ whp easily. The E153 gearbox is the main weak point.
Photo: Tokumeigakarinoaoshima · CC0 · Wikimedia Commons
- Stage 0 · BaselineStock (225–245 PS)Alignment, bushings, timing service, cooling.~$2,000–4,000 CAD
- Stage 1 · Street~240–280 whpExhaust, boost control, fuel cut.~$1,500–4,000 CAD
- Stage 2 · Spirited / Track~300–380 whpLSD, ECU, fuel and turbo upgrade.~$6,000–12,000 CAD
- Stage 3 · Full build400+ whpBuilt 3S-GTE and gearbox for 400+ whp.~$15,000–30,000 CAD
Check before modifying
- Snap oversteer with wrong tires or alignment; later revisions improved suspension.
- E153 gearbox and open diff fail with power and wheelspin; LSD helps.
- Coolant lines run the length of the car; bleed carefully.
- Gen 2 engines use an AFM (MAF-style) meter; gen 3 uses MAP.
Trim differences
- Rev 1–2 (1989–1993) have gen 2 3S-GTE (~225 PS). Rev 3+ (1994+) have gen 3 (~245 PS).
Baseline
Alignment, bushings, timing service, cooling.
- Power (estimate)
- Stock (225–245 PS)
- Parts budget
- ~$2,000–4,000 CAD
Engine
- Timing belt and water pumpAisinToyota OEM
Suspension
- Bushings, toe links, alignmentSuperProToyota OEM
Wheels & tires
- Matched quality tiresYokohamaBridgestone
Order of work
- Alignment and tires before anything else; then the timing belt.
Street
Exhaust, boost control, fuel cut.
- Power (estimate)
- ~240–280 whp
- Parts budget
- ~$1,500–4,000 CAD
Intake & exhaust
- Downpipe and 3-inch exhaustHKSATScustom
Electronics & tuning
- Boost controller + fuel cut defender (gen 2) or ECUHKSBlitz
Cooling
- Intercooler upgradeGreddyATSHKS
Brakes
- Performance pads and DOT 4 fluidHawkProject MuMotul
Order of work
- Exhaust, then intercooler, then boost.
Spirited / Track
LSD, ECU, fuel and turbo upgrade.
- Power (estimate)
- ~300–380 whp
- Parts budget
- ~$6,000–12,000 CAD
Drivetrain
- E153 LSDQuaifeOS Giken
- Uprated clutchExedyCompetition Clutch
Forced induction
- CT20B hybrid or GT28/GT30 kitGarrett
Electronics & tuning
- Standalone ECULinkHaltech
Fuel
- Injectors and pumpInjector DynamicsWalbro
Suspension
- CoiloversTeinKWBC Racing
Order of work
- LSD before more power, then fuel and ECU, then turbo.
Full build
Built 3S-GTE and gearbox for 400+ whp.
- Power (estimate)
- 400+ whp
- Parts budget
- ~$15,000–30,000 CAD
Engine
- Forged internals, ARP studs, MLS gasketCPManleyARP
Drivetrain
- Built E153 or dog gearboxSQSQuaife
Interior
- Cage, seats, harnessesSparcoOMP
Order of work
- Engine and gearbox together, then safety gear.
Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.