Guide de préparation
Toyota MR2 GT (SW20)
Moteur: 3S-GTE (gen 2 CT26 early; gen 3 CT20B from 1994)
The mid-engine turbo MR2. Its reputation for snap oversteer is mostly a matter of tires, alignment and tired bushings. The 3S-GTE makes 300+ whp easily. The E153 gearbox is the main weak point.
Ce guide est en anglais pour l’instant.
Photo : Tokumeigakarinoaoshima · CC0 · Wikimedia Commons
- Étape 0 · BaseStock (225–245 PS)Alignment, bushings, timing service, cooling.~$2,000–4,000 CAD
- Étape 1 · Rue~240–280 whpExhaust, boost control, fuel cut.~$1,500–4,000 CAD
- Étape 2 · Sportive / Piste~300–380 whpLSD, ECU, fuel and turbo upgrade.~$6,000–12,000 CAD
- Étape 3 · Préparation complète400+ whpBuilt 3S-GTE and gearbox for 400+ whp.~$15,000–30,000 CAD
À vérifier avant de modifier
- Snap oversteer with wrong tires or alignment; later revisions improved suspension.
- E153 gearbox and open diff fail with power and wheelspin; LSD helps.
- Coolant lines run the length of the car; bleed carefully.
- Gen 2 engines use an AFM (MAF-style) meter; gen 3 uses MAP.
Différences entre versions
- Rev 1–2 (1989–1993) have gen 2 3S-GTE (~225 PS). Rev 3+ (1994+) have gen 3 (~245 PS).
Base
Alignment, bushings, timing service, cooling.
- Puissance (estimation)
- Stock (225–245 PS)
- Budget pièces
- ~$2,000–4,000 CAD
Moteur
- Timing belt and water pumpAisinToyota OEM
Suspension
- Bushings, toe links, alignmentSuperProToyota OEM
Roues et pneus
- Matched quality tiresYokohamaBridgestone
Ordre des travaux
- Alignment and tires before anything else; then the timing belt.
Rue
Exhaust, boost control, fuel cut.
- Puissance (estimation)
- ~240–280 whp
- Budget pièces
- ~$1,500–4,000 CAD
Admission et échappement
- Downpipe and 3-inch exhaustHKSATScustom
Électronique et calibration
- Boost controller + fuel cut defender (gen 2) or ECUHKSBlitz
Refroidissement
- Intercooler upgradeGreddyATSHKS
Freins
- Performance pads and DOT 4 fluidHawkProject MuMotul
Ordre des travaux
- Exhaust, then intercooler, then boost.
Sportive / Piste
LSD, ECU, fuel and turbo upgrade.
- Puissance (estimation)
- ~300–380 whp
- Budget pièces
- ~$6,000–12,000 CAD
Transmission
- E153 LSDQuaifeOS Giken
- Uprated clutchExedyCompetition Clutch
Suralimentation
- CT20B hybrid or GT28/GT30 kitGarrett
Électronique et calibration
- Standalone ECULinkHaltech
Alimentation
- Injectors and pumpInjector DynamicsWalbro
Suspension
- CoiloversTeinKWBC Racing
Ordre des travaux
- LSD before more power, then fuel and ECU, then turbo.
Préparation complète
Built 3S-GTE and gearbox for 400+ whp.
- Puissance (estimation)
- 400+ whp
- Budget pièces
- ~$15,000–30,000 CAD
Moteur
- Forged internals, ARP studs, MLS gasketCPManleyARP
Transmission
- Built E153 or dog gearboxSQSQuaife
Intérieur
- Cage, seats, harnessesSparcoOMP
Ordre des travaux
- Engine and gearbox together, then safety gear.
Les chiffres de puissance et de budget sont des estimations (pièces seulement, en $ CA), pas des garanties : le carburant, la calibration, le climat et le choix des pièces changent tout. Les marques sont des exemples, pas des commandites. Retirer ou vider les catalyseurs, ou désactiver les systèmes antipollution, est illégal sur les voitures de route au Canada et aux États-Unis; les pièces marquées « hors route / piste seulement » sont réservées aux véhicules de compétition.